Premium remodeling in Draper.

Kitchen Remodeling Cost in Draper

Kitchen remodels in Draper typically range from $50k on the lighter end — finish swaps, new cabinetry doors and hardware, countertops, and lighting — up to $140k+ for full gut renovations that move walls, relocate plumbing, add an island, and upgrade appliances. Drivers include cabinetry tier (stock vs. semi-custom vs. custom), countertop material (laminate vs. quartz vs. natural stone), whether structural walls come down, and how far the electrical panel sits from the new layout.

Bathroom Remodeling Cost in Draper

Bathroom remodels typically run $18k–$55k. Powder rooms and guest baths sit at the lower end; primary-suite remodels with curbless showers, double vanities, heated floors, and relocated plumbing land at the upper end. Most homes in this area have modern PEX or copper supply lines and PVC drains, which keeps bathroom remodels predictable and on-schedule.

Basement Finishing Cost in Draper

Finished basements in Draper run $35k–$110k depending on square footage, whether you add a bedroom and egress window, whether a second kitchen or wet bar goes in, and whether the bathroom is a half-bath or a full primary-suite-style addition. Most Draper basements also need additional HVAC capacity — a single duct run rarely conditions a fully-finished space comfortably.

Whole-Home Renovation Cost

Whole-home renovations vary widely — from $80k light cosmetic refreshes to $400k+ down-to-studs renovations that re-plumb, re-wire, re-roof, and re-insulate. Homeowners in this market typically invest at the upper end of these ranges because finishes, structural complexity, and design expectations run higher than the county average.

Factors that move the budget in Draper

• Home age and condition. Post-1995 luxury and hillside construction with strong SunCrest and Corner Canyon presence — the older end of that range carries hidden-condition risk.
• Existing wiring and plumbing. Older galvanized supply lines, aluminum wiring, or undersized panels add cost to any kitchen or bath remodel.
• Material selections. Cabinet tier and stone selection often swing a kitchen budget by $15k–$30k.
• Permits and inspections. Salt Lake County jurisdictions all require permits for structural, electrical, plumbing, and HVAC work — these add lead time but protect resale value.
• Structural modifications. Removing a load-bearing wall typically adds $3,500–$9,000 once engineering, beam, and post pads are accounted for.
• Utility upgrades. Panel upgrades to 200A run $2,800–$4,500. Re-routing gas, water, or sewer lines is highly site-dependent.

Common Home Styles in Draper

Draper housing reads as large traditional estates, SunCrest mountain modern, Corner Canyon custom builds, and Draper Temple-area homes. Each architectural style brings its own remodeling considerations.

Most homes in Draper fall into post-1995 luxury and hillside construction with strong SunCrest and Corner Canyon presence. That mix shapes the remodeling work we see across Corner Canyon, SunCrest, Draper Temple, and South Mountain. Premium construction in this market often combines custom cabinetry, natural stone, integrated appliances, and trim work that requires specialty crews — we use the same trim and tile partners across these projects so quality stays consistent.

Remodeling challenges we see most

• Original kitchens designed for one cook. Draper homes built before 2000 tend to have galley layouts or closed-off kitchens — opening them to the family room is the single most-popular request we get.
• Aging primary bathrooms. Acrylic tubs, builder-grade vanities, and low-flow but inefficient toilets — primary baths haven't aged as well as the kitchens around them.
• Unfinished basements. Many Draper homes were sold with framed-but-unfinished basements. Finishing them adds 30–50% to usable square footage at a fraction of new-construction cost.
• Original windows and insulation. Older homes in particular benefit enormously from window replacement and attic-insulation upgrades — utility bills drop noticeably the first winter.

Modernization opportunities

The biggest opportunities we see in Draper are open-concept main-floor remodels, primary-suite expansions, basement-apartment conversions for multi-generational households, and energy-efficiency packages that pair window, insulation, and HVAC upgrades. Each of these lifts day-to-day livability AND resale value — a rare combination.

Featured Project Types We Complete in Draper

Here's what real ProCareMan remodels look like in and around Draper. Where we don't yet have a published case study from the city itself, we've noted that the project came from a neighboring Salt Lake County community with the same housing profile.

Kitchen Transformation — Corner Canyon

A typical kitchen project in Corner Canyon starts with a galley or closed-off kitchen and ends with a 9–11 foot island, two-tone cabinetry, quartz waterfall countertops, a panel-ready refrigerator, an induction or gas range, and updated lighting on dedicated circuits. We typically also relocate the dishwasher and add a pot filler over the range. Budget range: $50k–$140k depending on cabinet tier and whether structural walls move.

Primary Bathroom Upgrade — SunCrest

Primary bathroom remodels in SunCrest typically remove the original acrylic tub-and-shower combo and replace it with a curbless walk-in shower with a linear drain, large-format porcelain wall tile, niche shelving, a floating double vanity, heated tile floors, and an integrated LED mirror. Budget range: $18k–$55k.

Basement Finishing — Draper Temple

A complete basement finish in Draper Temple typically includes a great room, two bedrooms with egress windows, a full bathroom, a wet bar or kitchenette, and storage. We coordinate the egress-window cuts, foundation waterproofing, HVAC supply additions, and electrical sub-panel work as a single phased project. Budget range: $35k–$110k.

Whole-Home Renovation

Whole-home renovations across Draper typically combine a kitchen-and-family-room open-concept remodel, a primary bath upgrade, refinished hardwood floors throughout the main level, interior paint top-to-bottom, and an HVAC right-sizing — completed in a single 4–6 month phased sequence so the family can stay in the home during most of the build.

Browse our case studies to see specific projects with before-and-after photography, scope-of-work breakdowns, and the calm written-estimate process behind every one.